Manual.ly Logo

Nolan N100-5 Manual

0,0 · 0 Avaliações

Manual em PDF · 116 Páginas

Português

M: GO-GEM-FL-25
página

/ 116

Loading...
69fd6a5e58c38ca0373746be471a62d62d3f page 16
22
N100-5
8 CHEEK PAD ASSEMBLY
8.1 Put the left cheek pad against the corresponding polystyrene inner cheek pad,
insert the chin strap into the passageway of the cheek pad padding and push it
near the three buttons on its back in order to fasten them to their seats (Fig.15).
8.2 Repeat these steps with the right cheek pad padding.
Warning: the buttons are not fastened until a click is heard. Check that the strap
comes out properly from the cheek pad padding.
8.3 Insert the chin strap band into the elastic loops on the roll neck (Fig.14).
WARNING
- If your helmet is equipped with the double D-Ring retention system, pull it
down as indicated in the attached double D-Ring label.
- Remove the inner comfort padding only when cleaning or washing is required.
- Never use the helmet if the inner comfort padding and the cheek pads have not
been correctly and completely tted.
- Delicately hand-wash in lukewarm water (max. 30° C) and neutral soap.
- Rinse with cold water and allow drying at room temperature, away from direct
sunlight.
- Never machine-wash the inner comfort padding.
- The inner polystyrene is an easily deformable material. It is apt to change or get
partially destroyed to help absorb shocks.
- Do not modify or alter the helmet’s internal polystyrene components in any way.
- Clean the inner polystyrene components with a damp cloth only and allow it to dry
at room temperature away from direct sunlight.
- Never use tools or equipment of any sort to carry out the steps described above.
9 ADJUSTING THE ROLL NECK STRETCH
The roll neck stretch can be adjusted to adapt to the different sizes or riding positions
of the riders.
9.1 To increase the roll neck stretch press the button of the left strap clip and simulta-
neously pull the elastic strap towards the rear part of the helmet (Fig. 23). Follow
the same steps on the other side of the helmet.
9.2 To decrease the roll neck stretch press the button of the left strap clip button and
simultaneously push the rear part of the roll neck to loosen the stretch of the elas-
tic strap (Fig. 24). Follow the same steps on the other side of the helmet.
9.3 Wear and fasten the helmet (see instructions above) and make sure that the roll
neck stretch in the riding position is satisfactory.
WARNING
After assembling or disassembling the roll neck and/or adjusting the stretch, wear
and fasten the helmet to check the correct adjustment of the chin strap (see at-
tached label), the correct positioning of the helmet on the head in the riding posi-
tion and the VPS functionality in all positioning notches.
3.4 Pull the roll neck towards the inside of the helmet to remove the two rear aps
of the roll neck from the seats on the shell sealing edge and remove it from the
helmet (Fig.20).
4 LINER DISASSEMBLY
4.1 Unhook the left rear ap of the liner from the shell rear edge by slightly puling the
comfort padding towards the inside of the helmet (Fig.21). Follow the same steps
for the right rear ap.
4.2 Hold the left front part of the liner and pull it upwards in order to remove the cor-
responding liner ap from the support xed to the polystyrene inner shell (Fig.22).
Then repeat the same steps for the central front and right ap.
4.3 Completely remove the liner from the helmet.
5 LINER ASSEMBLY
5.1 Insert the liner correctly into the helmet and t it well against the base.
5.2 Insert the central front ap of the liner into its seat on the support xed to the pol-
ystyrene inner shell and push it downwards until it is completely locked (Fig.22).
Then repeat the operation with the left and right aps making sure that the side
ends of the liner are placed between the external side frames and the polystyrene
inner shell.
Warning: Check the correct assembly of the liner front area by lifting and lowering
the VPS. These movements should be smooth. If this is not the case, repeat steps
4.2 and 5.2.
5.3 Insert the rear right and left aps of the liner into the relevant lower seats on the
shell edge (Fig.21). Push the aps until they are fully hooked onto the support.
6 ASSEMBLY OF THE ROLL NECK
6.1 Insert the rear right and left aps of the roll neck into the relevant upper seats on
the shell edge (Fig.20). Push the aps until they are fully hooked onto the support.
6.2 Insert the side ap into the seat on the lining of the left polystyrene cheek pad and
push it towards the inside of the helmet until it is completely locked to the support
(Fig.19).
6.3 Press the front button of the roll neck to fasten it to the corresponding seat on the
lining of the left polystyrene cheek pad (Fig.18).
6.4 Follow the same steps on the other side of the helmet.
7 ASSEMBLY OF THE INNER EXPANDING FOAM PADDING OF THE CHEEK PADS
7.1 Gently put the inner expanding foam padding inside the fabric lining of the left
cheek pad (Fig.17). Carefully spread out the padding while checking that there are
no wrinkles in the cheek pad fabric lining.
7.2 Insert the upper ap “B” and the lower ap “C” of the frame into their loops on the
back of the frame (Fig.16).
7.3 Fasten the three eyelets “A” of the rear frame of the left cheek pad next to the three
snap buttons (top, front and rear) on its back (Fig.16).
7.4 Repeat these steps with the right cheek pad padding.
INSTRUCTIONS FOR USE

Converse com o manual do seu Nolan N100-5 através de IA

Obtenha respostas instantâneas de IA a partir do manual do seu Nolan N100-5

Pergunte qualquer coisa sobre o Nolan N100-5. As respostas vêm deste manual, com as páginas nas quais se baseiam.

N100-5 Cronograma de manutencao

Após cada uso
Secar capacete e viseira

Deixe o capacete secar em local ventilado com a viseira aberta após o uso. Mantenha afastado de fontes de calor.

Mostrar no manual (pagina 6)
Conforme necessário
Limpar viseira interna PINLOCK

Remova a viseira interna e limpe delicadamente com sabão líquido neutro e pano úmido. Enxágue sob água corrente.

Mostrar no manual (pagina 6)
Periodicamente
Verificar esticamento da PINLOCK

Verifique regularmente o esticamento correto para evitar movimento e riscos nas superfícies.

Mostrar no manual (pagina 6)
Conforme necessário
Substituir viseira riscada

Se a viseira estiver danificada ou profundamente riscada, reduzindo a visibilidade, substitua-a imediatamente.

Mostrar no manual (pagina 2)
Conforme necessário
Lavar forro de conforto

Lavar apenas à mão em água morna (max 30 C) com sabão neutro. Não lavar na máquina.

Mostrar no manual (pagina 22)
M: QW-35-FL

Faça uma Pergunta

0/1000

Você recomenda N100-5?

Sim Não

Perguntas Frequentes

A

É um capacete modular para motocicleta com queixeira basculante, sistema de viseira, proteção solar interna e características focadas no conforto para uso diário na estrada.

Esta resposta foi útil?

A

O acabamento de alta visibilidade ajuda o motociclista a destacar-se mais facilmente no trânsito, o que pode ser especialmente útil em áreas urbanas movimentadas, com pouca luz ou em condições meteorológicas instáveis.

Esta resposta foi útil?

A

A queixeira usa um processo de abertura em duas etapas, com alavancas separadas para libertação e abertura. Isso facilita o uso com uma só mão e ajuda a reduzir a abertura acidental.

Esta resposta foi útil?

A

Sim. O capacete suporta uma posição de abertura mínima da viseira para ventilação e também pode usar uma viseira interna Pinlock para melhorar a resistência ao embaciamento em condições húmidas ou frias.

Esta resposta foi útil?

A

Sim. As almofadas de bochecha, o colarinho e o forro são removíveis, o que facilita a limpeza e ajuda os motociclistas a manter um melhor ajuste e um interior mais fresco ao longo do tempo.

Esta resposta foi útil?

A

Sim. O capacete está preparado para sistemas de comunicação N-Com, dependendo da versão. Algumas peças internas de espuma podem precisar de ser removidas durante a instalação de componentes compatíveis.

Esta resposta foi útil?

M: GO-GEM-FL-25

Vantagens e Desvantagens

Vantagens

  • O sistema de queixeira Dual Action melhora a conveniência e ajuda a evitar aberturas acidentais.
  • O design de alta visibilidade aumenta a presença do motociclista no trânsito e em condições de pouca luz.
  • A pala solar VPS e o suporte opcional Pinlock melhoram a visibilidade em condições meteorológicas variáveis.
  • O acolchoamento removível e o sistema de ventilação melhoram o conforto e facilitam a manutenção.
VS

Desvantagens

  • O design modular pode parecer mais complexo do que um capacete integral simples.
  • As peças da viseira, da VPS e do Pinlock exigem manuseamento cuidadoso para evitar riscos ou desgaste.
  • A proteção depende de um ajuste correto e de um fecho adequado, por isso o tamanho é muito importante.
  • Alguns acessórios e funcionalidades podem variar consoante a versão ou exigir instalação separada.
M: GO-GEM-FL-25

Produto Especificação

Tipo

Capacete Modular

Características

Viseira Solar Integrada

Peso

1,65 kg

M: GO-GEM-FL-25

Produto Descrição

Nolan N100-5 Alta Visibilidade (vários tamanhos)

O Nolan N100-5 Alta Visibilidade foi criado para motociclistas que procuram um capacete modular prático, com grande foco em segurança, visibilidade e conforto no dia a dia. Projetado para uso em motocicleta, combina uma queixeira basculante, um sistema de viseira transparente e um acabamento de alta visibilidade que ajuda o condutor a se destacar mais facilmente no trânsito. O resultado geral é moderno, funcional e feito para a condução no mundo real.

Uma das suas características de destaque é o sistema de queixeira Dual Action. Esse mecanismo foi desenvolvido para ser aberto com uma só mão, ajudando ao mesmo tempo a reduzir o risco de liberação acidental. Os motociclistas podem alternar entre uma configuração totalmente fechada para máxima proteção e uma configuração aberta para conveniência em paragens ou em trânsito mais lento. Essa flexibilidade torna o capacete atraente tanto para quem se desloca diariamente quanto para viajantes.

A visibilidade é outro ponto forte importante. O capacete suporta uma viseira externa padrão, uma posição de abertura mínima para ventilação e desembaçamento, e uma pala solar interna VPS para condições de muita luz. Para motociclistas que lidam com mudanças de clima, a viseira interna opcional Pinlock adiciona uma camada extra de proteção antiembaciamento. Em conjunto, esses elementos ajudam a manter uma visão mais clara da estrada quando a temperatura desce, a humidade aumenta ou a luz solar fica intensa.

O conforto e a adaptabilidade também recebem atenção séria. O acolchoamento interno removível, as almofadas de bochecha e as partes do colarinho foram concebidos para melhorar o ajuste e simplificar a limpeza. O sistema de ventilação ajuda a conduzir ar fresco através do capacete, reduzir a acumulação de calor e limitar o embaciamento da viseira. Além disso, o capacete está preparado para sistemas de comunicação N-Com, tornando-se uma escolha inteligente para motociclistas que querem manter-se ligados sem comprometer o conforto.

Notas

  • Mais indicado para motociclistas que procuram um capacete modular com grande versatilidade para o dia a dia.
  • Disponível em vários tamanhos, por isso o ajuste deve ser verificado cuidadosamente para estabilidade e conforto.
  • Siga as orientações de limpeza e manutenção para proteger a viseira, o acolchoamento e a pala solar.
  • A inspeção regular das correias, das peças da viseira e dos sistemas de bloqueio ajuda a preservar o desempenho ao longo do tempo.
  • O estilo de alta visibilidade acrescenta uma vantagem prática de segurança em trânsito intenso e em condições de pouca luz.
M: GO-GEM-FL-25

© Copyright 2026 Manual.ly